Intel EXPRESS 330T Bedienungsanleitung PDF herunterladen (Seite 3)

Optional Information

Add Optional Modules

Changing MDI/MDI-X

for Port 1

Stack the Hubs

• All ports on the hub are MDI-X. Pressing the

MDI/MDI-X button switches Port 1 to MDI so

you can connect to another hub or switch using

a straight-through cable.

• Because the 330T is a Class II hub, never

daisy-chain a 330T hub to a Class I hub running

at 100Mbps with UTP cable. Doing so can lead

to poor network performance.

• Unplug the power cords from all the hubs.

• Use the included cascade cable to connect the

hubs. Hubs can be stacked up to five high

(mixed 16- or 24-port).

• When properly connected, the entire stack will

act as a single repeater with two segments

(10Mbps and 100Mbps). The top hub in a stack

will be numbered hub 1.

• The hub’s internal bridge automatically bridges

the 10Mbps and 100Mbps segments (collision

domains) for the entire stack.

• Both 16- and 24-port 330T hubs can accept

optional modules (refer to the User Guide).

• Use optional modules to manage a stack,

connect to devices at full duplex, or to extend

the network to another building or beyond

100 meters.

1234

Class

II

MDI

MDI-X

Intel

®

Express 330T Stackab

l

Intel

®

Express 300 Series

Management Module

Console: 9600-8-N-1

EIA 232

MAC Address

009027390005

Intel

®

Express 300 Series Fiber Module

Duplex

TX RX

Half

Full

Intel

®

Express 300 Series

Ethernet Module

Crossover

MDI

MDI-X

Fiber Module for

Express 330T Hubs

(EE300FX)

4

6

5

Module A

Cascade

Up

Down

Module A

Cascade

Up

Down

Module A

Cascade

Up

Down

Hub 1

Hub 2

Hub 3

Cascade Cable

MDI/MDI-X

button

English

nge)

Mbps

Mbps

Management Module for Express 330T Hubs (EE300MM)

Ethernet Module for

Express 330T Hubs

(EE300EM)

2

MDI

MDI-X

Stacking Hubs: The cascade cable

connects from the “Down” connector

on one hub to the “Up” connector on

the hub below it.

1 2 3 4 5 6 7 8 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare