Intel 815E Bedienungsanleitung PDF herunterladen (Seite 30)

User’s Manual

20 ECB-865 User’s Manual

3.10 Setting Jumpers

You can configure your board to match the needs of your application by setting jumpers. A

jumper is the simplest kind of electric switch.

It consists of two metal pins and a small metal clip (often protected by a plastic cover) that

slides over the pins to connect them. To “close” a jumper you connect the pins with the

clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins,

labeled 1, 2, and 3. In this case, you would connect either two pins.

The jumper settings are schematically depicted in this manual as follows:

A pair of needle-nose pliers may be helpful when working with jumpers.

If you have any doubts about the best hardware configuration for your application, contact

your local distributor or sales representative before you make any changes.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 111 112

Keine Kommentare

Intel 815E Bedienungsanleitung Seite 30